Wika CPP1200-X Manuel d'utilisateur Page 25
- Page / 72
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
25
WIKA operating instructions model CPP1200-X
GB
14076968.01 12/2013 GB/D
6. Commissioning, operation
6.5.1 To apply pressure
For pressures up to 140 bar (2,000 lb/in²)
1. Close valve B (valve A remaining open).
2. Wind spindle pump handle clockwise. This will generate pressure up to approxi-
mately 140 bar or 2,000 lb/in², as handle is wound in. When handle becomes sti to
rotate this will indicate that the pressure limit for this range has been reached.
For pressures above 140 bar (2,000 lb/in²)
1. Close Valve A and open valve B.
2. Continue to wind spindle pump handle clockwise. This will generate pressure up to
approximately 1,200 bar or 16,000 lb/in².
6.5.2 During calibration
Increase the pressure via the spindle pump in the clockwise direction, or use the ne
adjustment to approach the individual calibration points.
The display of the pressure measuring instrument being tested can be compared with
the reference measuring instrument at the individual calibration points.
If there are still small air particles within the system, the generated test
pressure will initially drop and must be readjusted accordingly.
With higher pressures, a longer waiting time than with lower pressures
should be expected until the steady-state condition has been reached.
6.6 Completion
1. After the test is nished wind spindle pump handle anti-clockwise to lower pressure.
2. Gently open valve A or B to release residual pressure.
3. Ensure that both valves A and B are fully open.
4. Remove device under test.
The system is now ready for another test and any residual pressure is relieved.
- 14076968.01 12/2013 GB/D 2
- Contents 3
- 1. General information 4
- 2. Safety 10
- 3. Specications 11
- 4. Design and function 17
- 6. Commissioning, operation 22
- 7. Maintenance and cleaning 27
- 8. Faults 32
- 9. Return and disposal 34
- 10. Accessories 35
- 1. Allgemeines 38
- 2. Sicherheit 39
- 3. Technische Daten 45
- 4. Aufbau und Funktion 51
- 6. Inbetriebnahme, Betrieb 56
- 7. Wartung und Reinigung 61
- 8. Störungen 66
- 9. Rücksendung und Entsorgung 68
- 10. Zubehör 69
- WIKA global 71
Produits connexes et manuels pour Instruments de mesure Wika CPP1200-X
(100 pages)
(100 pages)
(96 pages)Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Do samochodu Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra.
Dostarczamy 1 pdf podręczników Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels