Wika IPT-11 Manuel d'utilisateur Page 45
- Page / 56
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Nominal range Overload, max. pressure Overload, min. pressure
0 … 16 bar/0 … 1.6 MPa 80 bar/8 MPa -1 bar/-100 kPa
0 … 40 bar/0 … 4 MPa 80 bar/8 MPa -1 bar/-100 kPa
0 … 100 bar/0 … 10 MPa 200 bar/20 MPa -1 bar/-100 kPa
0 … 250 bar/0 … 25 MPa 500 bar/50 MPa -1 bar/-100 kPa
0 … 600 bar/0 … 60 MPa 1200 bar/120 MPa -1 bar/-100 kPa
-1 … 3 bar/-100 … 300 kPa 17 bar/1700 kP a -1 bar/-100 kPa
-1 … 5 bar/-100 … 500 kPa 35 bar/3500 kP a -1 bar/-100 kPa
-1 … 15 bar/-100 … 1.5 MPa 80 bar/8 MPa -1 bar/-100 kPa
Absolute pressure
0 … 0.4 bar/0 … 40 kPa 2 bar/200 kPa
0 bar abs.
0 … 1.6 bar/0 … 160 kPa 10 bar/1000 kP a
0 bar abs.
0 … 6 bar/0 … 600 kPa 35 bar/3500 kP a
0 bar abs.
0 … 16 bar/0 … 1.6 MPa 80 bar/8 MPa
0 bar abs.
Reference conditions and actuating variables (similar to DIN EN 60770-1)
Reference conditions according to DIN EN 61298-1
- Temperature +18 … +30 °C (+64 … +86 °F)
- Relative humidity 45 … 75 %
- Air pressure 860 … 1060 mbar/86 … 106 kPa (12.5 … 15.4 psig)
Determination of characteristics Limit point adjustment according to IEC 61298-2
Characteristics linear
Reference installation position upright, diaphragm points downward
Influence of the installation position depending on the isolating diaphragm version
Deviation determined according to the limit point method according to IEC 60770
12)
Applies to digital interfaces (HART, Profibus PA, Foundation Fieldbus) as well as to analogue
current output 4 … 20 mA. Specifications refer to the set span. Turn down (TD) is the relation
nominal measuring range/set span.
Deviation for measuring ranges 0.4 … 1000 bar
- Turn down 1 : 1 up to 5 : 1 < 0.1 %
- Turn down > 5 : 1 < 0.02 % x TD
Deviation for measuring ranges > 1000 bar
- Turn down 1 : 1 up to 2 : 1 < 0.6 %
Deviation with absolute pressure measuring range 0.1 bar
- Turn down 1 : 1 up to 5 : 1 < 0.25 %
- Turn down > 5 : 1 < 0.05 % x TD
12)
Incl. non-linearity, hysteresis and non-repeatability.
Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA/HART 45
10 Supplement
31543-EN-090130
- Operating Instructions 1
- Contents 2
- 1 About this document 4
- 2 For your safety 5
- 2.6 CE conformity 6
- 3 Product description 7
- 3.2 Principle of operation 8
- 3.3 Operation 8
- 4 Mounting 10
- 31543-EN-090130 11
- 4.2 Mounting instructions 12
- 4.3 Mounting steps 12
- 5 Connecting to power supply 13
- 5.2 Connection procedure 14
- 5.6 Switch on phase 20
- 6.1 Short description 22
- - Save value 24
- - Select editing position 24
- HART mode 25
- Standard 25
- Address 0 25
- Max. adjustment 28
- +100.0 % 28
- +1000.0 mbar 28
- 0000.0 mbar 28
- Copy sensor data 32
- Copy sensor data? 32
- 6.5 Menu schematic 34
- 7.1 Connecting the PC 37
- ? 4 … 20 mA signal not stable 39
- ? 4 … 20 mA signal missing 39
- 8.3 Instrument repair 40
- 9 Dismounting 42
- 10 Supplement 43
- 10.2 Dimensions 50
Produits connexes et manuels pour Instruments de mesure Wika IPT-11
(56 pages)
(60 pages)
(48 pages)
(48 pages)
(7 pages)
MicroNet Commutateurs de réseau manuels d'utilisation
La liste de MicroNet Commutateurs de réseau produits contient 11 manuels d'utilisation pour les modèles 10. Tous les guides d'utilisation en format pdf peuvent être téléchargés ou consultés en ligne.
Commentaires sur ces manuels