Wika MG-1 Manuel d'utilisateur télécharger pdf (Page 11)

11WIKA operating instructions pressure transmitter, model MG-1

11609681.02 03/2013 GB/D/F/E

Specications Model MG-1

Shock resistance g 40 (6 ms) per IEC 60068-2-27 (mechanical shock)

Vibration resistance g 20 (20 ... 2000 Hz, 120 min.) per IEC 60068-2-6

(Vibration under resonance)

Reverse polarity protection U

vs. 0V

Short-circuit resistance S

vs. 0V

Weight kg approx. 0.08

1) Including non-linearity, hysteresis, zero-point and full scale value deviations (corresponds to measuring error per IEC 61298-2).

Calibrated in vertical mounting position with process connection facing downwards.

3. Specications / 4. Design and function

For special model numbers, e. g. MG-10000, please note the specications stated on the

delivery note.

For further specications, see WIKA data sheet PE 81.44 and the order documentation.

When designing the system, please note that the values given (e.g. burst pressure,

overpressure safety) are dependent upon the material, thread and gasket used.

4. Design and function

4.1 Description

By means of a sensor element and by applying power, the prevailing pressure is converted into an

amplied standardised electrical signal via the deformation of a membrane. This electrical signal

varies in proportion to the pressure and can be evaluated accordingly.

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

Pas de commentaire

Wika MG-1 Manuel d'utilisateur Page 11