Wika UPT-21 Manuel d'utilisateur Page 35
- Page / 120
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
35
WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9.Congurationviadisplayandoperatingunit
9.3 Scalingthemeasuringrange
“Scale setting” denes the start and end of the measuring range.
9.3.1 Performingawetadjustment
For the start of the measuring range and end of the measuring range, the values will be
taken from the running measurement. The respective output signal can be adjusted.
Requirement Measurement must be running.
Setting range Start of measuring range: -10 ... +110 % of measuring range
End of measuring range: 1 ... 120 % of measuring range
Max. turndown: 100 : 1 (recommended max. 20 : 1)
1. Open the operating menu with [↵].
Select “Basic setting” and conrm with [↵].
2. Select “Scale setting” and conrm with [↵].
3. Select “Wet adjustm.” and conrm with [↵].
4. Dene the current measured value as start of
measuring range or end of measuring range:
Todeneasstartofmeasuringrange:
Conrm “min. adjustm.” with [↵].
Todeneasendofmeasuringrange:
Conrm “max. adjustm.” with [↵].
5. Change digit using [▲] [▼] and conrm with [↵]. The
cursor moves to the next digit. Repeat for each digit.
When the last digit is exited, the menu moves back
to step 2.
With the input of current values that are
not either 4 mA or 20 mA, the pressure
value is converted into the standardised
current signals as soon as the current
value entered is accepted.
- Operating instructions 1
- Betriebsanleitung 1
- Contents 3
- 1. General information 6
- 2. Safety 7
- 3.Specications 10
- 3. Specications 10
- 4. Design and function 18
- 6 Commissioning, operation 21
- 6. Commissioning, operation 21
- with at gaskets 21
- Spannungsquelle 30
- HART-Widerstand 250 ohm 30
- HART-Modem 30
- 10. Diagnostic functions 41
- 11. Detail setup 44
- 12. Instrument information 48
- 13. Maintenance and cleaning 49
- 14. Faults 50
- 16. Accessories 52
- Appendix 6: Menu tree, info 60
- 1. Allgemeines 64
- 2. Sicherheit 65
- 2.Sicherheit 66
- 3.TechnischeDaten 68
- 3. TechnischeDaten 68
- 4. Aufbau und Funktion 76
- 6.Inbetriebnah 79
- 6. Inbetriebnahme,Betrieb 79
- mit Flachdichtungen 79
- 6.Inbetriebnahme,Betrieb 80
- 10. Diagnosefunktionen 100
- 11. Detaileinstellungen 102
- 12. Geräteinformationen 106
- 13. Wartung und Reinigung 107
- 14. Störungen 108
- 14068347.01 06/2014 GB/D 109
- 16. Zubehör 110
- 1 1 1 1 1 1 112
- 1 2 1 2 1 112
- Anlage3:Menübaum,Anzeige 114
- Anlage4:Menübaum,Diagnose 115
- 4 6 4 6 1 117
- Anlage6:Menübaum,Info 118
Produits connexes et manuels pour Instruments de mesure Wika UPT-21
(52 pages)
(12 pages)
(56 pages)Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Do samochodu Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra.
Dostarczamy 1 pdf podręczników Rugged-ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wra do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels