Wika CPC3000 Manuel d'utilisateur télécharger pdf (Page 44)

Pneumatic High-Speed Pressure Controller CPC3000

WIKA Operating Instruction Pneumatic High-Speed Pressure Controller ∙ Version 1.144

11498171.01 08/2009 GB

Command Data Response/Function

Decpt? <sp>n<cr><lf> Returns the number of decimal points

for the active channel. (see Resolution)

Default None Sets the default values.

DHCP Reserved for DHCP SETUP

DHCP? Reserved for DHCP SETUP

DIO Integer 2 turns on digital output, 0 turns it off.

DIO? Bit0 = input, bit1 = output

DOC mm/dd/yyyy Sets the date of cal for the active

sensor and turndown.

DOC? <sp>mmddyy<cr><lf> Returns the date of cal for the active

sensor and turndown.

DOM? <sp> mm/dd/yyyy<cr><lf> Returns the date of manufacture.

DUTLABEL Reserved for DUT option

DUTLABEL? Reserved for DUT option

DUTTYPE Reserved for DUT option

DUTTYPE? Reserved for DUT option

DUTAMIN Reserved for DUT option

DUTAMIN? Reserved for DUT option

DUTAMAX Reserved for DUT option

DUTAMAX? Reserved for DUT option

DUTLOOP Reserved for DUT option

Error? <sp> text message <cr><lf> Returns the next error in the error

queue.

Errorno? <sp>Enn-text<cr><lf> Returns pcs400 error code and text.

Filter Off, Low, Normal, High Sets the reading filter 0, 80 %, 92 %,

95 %.

Filter? <sp> (filter)<cr><lf> Returns the reading filter.

Gasdensity Value in lb/cuft Sets the head pressure gas density in

lb/cuft.

Gasdensity? <sp>n.nnnnne+nn<cr><lf> Returns the head pressure gas density.

Gastemp Value in degrees F

Sets the head pressure gas temperature

in degrees F.

Gastemp? <sp>n.nnnnne+nn<cr><lf> Returns the head pressure gas temper-

ature.

Gateway nnn.nnn.nnn.nnn Sets the Ethernet gateway address.

Gateway? <sp>nnn.nnn.nnn.nnn<cr><lf> Returns the Ethernet gateway address.

Height Value in inches Sets the head pressure height in

inches.

Height? <sp>n.nnnnne+nn<cr><lf> Returns the head pressure height.

Id? <sp> MENSOR, CPC3000,

ssssss,v.v.vv

Ssssss is the serial number, v.vv is the

CPC3000 software version.

Install Start software installer.

IP nnn.nnn.nnn.nnn Sets the IP address of the instrument.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Wika CPC3000 Manuel d'utilisateur Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Wika CPC3000