Wika CPH6000 Manuel d'utilisateur télécharger pdf (Page 16)

16 WIKA operating instructions ProcessCalibrator, model CPH6000

11069023.04 11/2012 GB/D

4. Design and function

4.1 Short description

The model CPH6000 ProcessCalibrator combines the benets of a compact hand-held

instrument with the precision of a laboratory calibration instrument. Thus everyday tasks

in the eld, such as measuring, testing or calibration of pressure measuring instruments

(including certicate generation and testing pressure switches) become particularly

easy.

4.2 Scope of delivery

■

ProcessCalibrator model CPH6000

■

Battery charger

■

Test-cable set with various connectors

■

3.1 calibration certicate per DIN EN 10204

■

Choice of sensors

Cross-check scope of delivery with delivery note.

4.3 Electrical connections to the CPH6000

All electrical connections are located along the top edge of the CPH6000 (see picture

below).

WARNING!

Only original WIKA components should be connected to any of the

electrical connections. (Only the WIKA battery charger to the mains

input/charger socket; only WIKA test cable to the laboratory connectors

and only a WIKA RS-232 or USB connection cable to the interface

socket).

Mains supply /

charge socket

Interface USB/RS-232

Measuring input*

voltage

Voltage supply 24 V*

(activated via menu)

Measuring input*

current or pressure switch-test

* Connection: 4 mm socket

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 131 132

Pas de commentaire

Wika CPH6000 Manuel d'utilisateur Page 16