Wika CPH62I0 Manuel d'utilisateur télécharger pdf (Page 29)

29WIKA operating instructions, model CPH62I0

11221801.02 02/2011 GB/D/F/E

6. Commissioning, operation

The selection can be made with the ´MAX´ key and ´MIN´ key. The ´STORE/QUIT´ key

conrms the selection.

If you try to switch o the instrument during a logging cycle, you will

also be asked if you wish to stop recording. The device can only be

switched o after the recording has been stopped!

The Auto-Power-O-function is deactivated during logging!

Stop recording Do not stop recording

Starting logging:

By pressing ´STORE/QUIT´ for 2 seconds the logger operation will be selected. The

display will show:

By pressing ´STORE/QUIT´ again briey, the recording will be initiated.

After that the display shows ‘St.XXXX‘ for a short time whenever a measurement is

recorded. XXXX is the number of the measuring 1 ... 4000 or 10000.

If the logger memory is full, the display will show:

If the Low-Power-Logger-function is selected "Lo.Po = on" the device switches itself o

as soon as the memory becomes full.

Stopping the logging manually:

By pressing the ´STORE/QUIT´ key, recording can be manually interrupted. The follow-

ing choice then appears:

The recording will be stopped automatically.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 159 160

Pas de commentaire

Wika CPH62I0 Manuel d'utilisateur Page 29