Wika IPT-11 Manuel d'utilisateur télécharger pdf (Page 9)

4 Mounting

4.1 Mounting steps

The indicating and adjustment module can be inserted or removed at

any time. It is not necessary to interrupt the voltage supply.

For mounting, proceed as follows:

1 Unscrew the housing cover

2 Place the indicating/adjustment module in the requested position

on the electronics

Information:

Four diﬀerent positions are possible, each displaced by 90°.

Fig. 3: Mounting the indicating and adjustment module

3 Press the indicating/adjustment module lightly onto the electronics

and turn it to the right until it snaps in

4 Screw housing cover with inspection window tightly back on

Note:

If you intend to retroﬁt the instrument with an indicating and adjustment

module for continuous measured value indication, a higher cover w ith

an inspection glass is required.

Mount/Dismount indicat-

ing and adjustment

module

Indicating and adjustment module for IPT-1* sensors 9

4 Mounting

31549-EN-081211

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Pas de commentaire

Wika IPT-11 Manuel d'utilisateur Page 9