Wika TR10-C Manuel d'utilisateur Page 23

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 22
WIKA operating instructions resistance thermometers and thermocouples, Ex n
14106886.01 06/2014 GB/D
23
GB
D) Point C) does not apply if the component was repaired by the manufacturer and subject to a
component testing.
E) When using a transmitter you must consider:
The contents of these operating instructions and those of the transmitter
The relevant regulations for installation and use of electrical systems
The regulations and guidelines regarding explosion protection
Transmitters must have their own certication.
F) When ordering spare parts, the parts that are to be replaced must be specied exactly:
Ignition protection type (Ex n)
Approval No.
Order No.
Manufacturing No.
Order item
G) Thermometers as explosion-protected equipment only full the safety-relevant demands as
components, as dened in the approval.
Measuring elements or connection heads alone do not full the requirements of
explosion protection.
H) Installation in Zone 22 (dust)
The requirements of EN 60079-0 and EN/IEC 60529 must be followed.
The surface temperature of the equipment must not be high enough to ignite disturbed dust or
dust deposited on the equipment.
Without dust deposit:
The surface temperature may not exceed 2/3 of the ignition temperature in °C of the
respective dust/air mixture (IEC/EN 60079-14).
With dust deposit:
On surfaces where a dangerous deposit of ignitable dust is not eectively prevented, the
surface temperature may not exceed a temperature of 75 K less than the ignition temperature
of the respective dust. With layer thicknesses over 5 mm, a further reduction of the
temperature is necessary.
I) The installer guarantees as his own responsibility that all thermometers in operation are
identiable with respect to all safety-relevant characteristics.
7. Information on mounting and operation in hazardous areas
Vue de la page 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Commentaires sur ces manuels

Pas de commentaire