Wika UPT-21 Manuel d'utilisateur télécharger pdf (Page 32)

WIKA operating instructions process transmitter, model UPT-2x

14068347.01 06/2014 GB/D

9.Congurationviadisplayandoperatingunit

9.1.2 Conguringlevelmeasurement

1. Open the operating menu with [↵].

Select “Basic setting” and conrm with [↵].

2. Select “Application” and conrm with [↵].

3. Select “Level” and conrm with [↵].

4. Select “Unit” and conrm with [↵].

5. Select length unit and conrm with [↵].

Length unit is set.

6. Select “Density” and conrm with [↵].

7. Select “Density unit” and conrm with [↵].

8. Select density unit and conrm with [↵].

Density unit is set.

9. Select “Density value” and conrm with [↵].

10. Set digit using [▲] [▼] and conrm with [↵]. The

cursor moves to the next digit. Repeat for each digit.

Density value is set.

11. Go back two menu levels using [ESC].

Select “Mode” and conrm with [↵].

12. Select “Level” and conrm with [↵].

Mode is set.

13. Perform a mounting correction.

See chapter 9.5 “Mounting correction (oset)”.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Pas de commentaire

Wika UPT-21 Manuel d'utilisateur Page 32