Wika UPT-21 Manuel d'utilisateur télécharger pdf (Page 37)

WIKA operating instructions process transmitter, model UPT-2x

14068347.01 06/2014 GB/D

9.Congurationviadisplayandoperatingunit

9.4 Settingthemode

The mode denes which measurement parameter will be transmitted via the current

output (pressure, level)

If the PV (primary value) is indicated on the main display, the indicated

value will change according to the mode. This means that the main display

indicates the pressure or the level, depending on the mode.

1. Open the operating menu with [↵].

Select “Basic setting” and conrm with [↵].

2. Select “Application” and conrm with [↵].

3. Select “Mode” and conrm with [↵].

4. Select measurement parameter and conrm with [↵].

Mode is set.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 119 120

Pas de commentaire

Wika UPT-21 Manuel d'utilisateur Page 37