Wika CPC6000 Manuel d'utilisateur télécharger pdf (Page 65)

Automated Pressure Calibrator

CPC 6000

Mensor/WIKA Operating Instructions - CPC 6000 65

:AUTOvent ON/OFF/1/0 Sets autovent function on or off (automatically vent when

controlling at zero).

:AUTOvent? Returns status of Autovent function.

[SOURCE]

:PRESsure

[:LEVel]

[:IMMediate]

[:AMPLitude] <n> Sets the control pressure.

[:AMPLitude]? Returns current control pressure value.

:SLEW <n> Sets the slew rate in %FS/s.

:SLEW? Returns the current slew value in %FS/s.

:TOLerance <n> Sets the tolerance for stable indication in %FS.

:TOLerance? Returns the tolerance for stable indication in %FS.

CALCulate

:LIMit

:LOWer <n> Sets minimum control limit.

:LOWer? Returns minimum control limit.

:UPPer <n> Sets maximum control limit.

:UPPer? Returns maximum control limit.

7.4.7.3.1 Output Formats

1. <sp>pressure value<cr><lf>

2. <sp>pressure, units number, mode<cr><lf>

3. <sp>pressure, pressure rate<cr><lf>

4. <sp>pressure, minimum peak, maximum peak<cr><lf>

5. <sp>pressure, active sensor (P or S) active turndown (1-4)<cr><lf>

6. <sp>pressure, control point, “stable” or “slewing”<cr><lf>

7. <sp>pressure, “no barometer” or baro reading<cr><lf>

7.4.7.3.2 Error Messages and Error Codes

A recognized command is displayed at the device in the headline with “Remote...”. In case of error

“Remote error...” is displayed. A maximum of 100 errors are stored and can be retrieved successfully.

Table 7.4.7.3.2 - SCPI Command Error Messages and Error Codes

Code Error String Returned

0 No error

-101 Undefined character

-102 Syntax error

-103 Undefined separator

-104 Parameter data type error

-109 Parameter missing

-110 Undefined header

-113 Undefined command

-114 Parameter out of range

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Wika CPC6000 Manuel d'utilisateur Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Wika CPC6000