Wika CPC6000 Manuel d'utilisateur télécharger pdf (Page 74)

Automated Pressure Calibrator

CPC 6000

74 Mensor/WIKA Operating Instructions - CPC 6000

8.6.2 Screen Source

The CPC 6000 has two frames in which channel information can be displayed. The frame channel

source can be programmed to A(left) B(right) or A(left) Delta(right) or Delta(left) B(right). Either frame

can be minimized as before.

8.6.3 Configure Button

In order to allow the delta function and frame channel source to be changed, a new button was added

to the lower toolbar. This button is labeled ‘Configure’ and only appears when the Delta function is

enabled. Pressing this button brings up a window with radio buttons to select the desired configura

tion as shown in Figure 8.6.3.

Figure 8.6.3 - Configure Button Display Screen

8.6.4 Slave Channel Display

Since the range information is not applicable to the delta channel, the slave channel (the physical one

not displayed) reading is displayed where the range droplist appears in the normal screen.

8.6.5 Screen Source A B

Channels are completely independent. Operates just like a standard CPC 6000.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 103 104

Pas de commentaire

Wika CPC6000 Manuel d'utilisateur Page 74