Wika CPC2000 Manuel d'utilisateur télécharger pdf (Page 7)

7WIKA operating instructions, model CPC2000

11155094.02 07/2012 GB/D/F/E

2. Safety

Special operating conditions require further appropriate knowledge, e.g. of aggressive

media.

2.3 Special hazards

WARNING!

Protection from electrostatic discharge (ESD) required.

The proper use of grounded work surfaces and personal wrist straps is

required when working with exposed circuitry (printed circuit boards),

in order to prevent static discharge from damaging sensitive electronic

components.

To ensure safe working on the instrument, the operating company must

ensure

■

that suitable rst-aid equipment is available and aid is provided

whenever required.

■

that the operating personnel are regularly instructed in all topics

regarding work safety, rst aid and environmental protection and

knows the operating instructions and, in particular, the safety instruc-

tions contained therein.

DANGER!

Danger of death caused by electric current

Upon contact with live parts, there is a direct danger of death.

Operation using a defective power supply unit (e.g. short circuit from the

mains voltage to the output voltage) can result in life-threatening voltag-

es at the instrument!

WARNING!

Residual media on the dismounted low-pressure controller can result

in a risk to persons, the environment and the equipment. Take sucient

precautionary measures.

Do not use this instrument in safety or Emergency Stop devices. Incor-

rect use of the instrument can result in injury.

Should a failure occur, aggressive media with extremely high tempera-

ture and under high pressure or vacuum may be present at the instru-

ment.

max

= 1 bar atmospheric pressure

1 2 3 4 5 6 7 8 9 10 11 12 ... 131 132

Pas de commentaire

Wika CPC2000 Manuel d'utilisateur Page 7