WIKA CTH6500 Instructions d'exploitation télécharger pdf (Page 23)

23WIKA operating instructions, models CTH6300 and CTH6500

2079988.02 04/2013 GB/D

6. Commissioning, operation

Measurement

parameter

Probe selection (Prob) LCD display

Temperature Pt100 (RTD)

Temperature Fe-CuNi type J

Temperature NiCr-Ni type K

Temperature Fe-CuNi type L

Temperature NiCrSi-NiSi type N

Temperature Pt13Rh-Pt type R

Temperature Pt10Rh-Pt type S

Temperature Cu-CuNi type T

Humidity % r. h.

Flow m/s

Pressure Pa

Hot wire m/s

Conrm the required setting by pressing ENTER/MENU. Press ESC to return to the

measuring mode again.

Make sure that the correct measurement parameter is set for the

connected probe. If a measurement parameter is changed in the Prob

menu and the change conrmed by pressing the Enter key, the standard

calibration is used automatically.

Note on combined probes (temperature and humidity):

Set relative humidity as a measurement parameter for the measuring

channel to which the combined probe is connected. If you want the

temperature value of the connected combined probe to be displayed as

well, deactivate the channel to which no combined probe is connected

(see chapter 6.4.6 "Activate/deactivate measuring channels [Chnl]".

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Pas de commentaire

WIKA CTH6500 Instructions d'exploitation Page 23