WIKA CTH6500 Instructions d'exploitation télécharger pdf (Page 6)

6 WIKA operating instructions, models CTH6300 and CTH6500

2079988.02 04/2013 GB/D

2. Safety

2.1 Intended use

The general-purpose hand-held thermometers for the mobile, demanding temperature

measurement process signals of typical thermometers. Thus temperatures from

-200 ... +1,500 °C can be measured.

The instrument has been designed and built solely for the intended use described here,

and may only be used accordingly.

The technical specications contained in these operating instructions must be

observed.

If the instrument is transported from a cold into a warm environment, the formation of

condensation may result in instrument malfunction. Before putting it back into operation,

wait for the instrument temperature and the room temperature to equalise.

The manufacturer shall not be liable for claims of any type based on operation contrary

to the intended use.

2.2 Personnel qualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and damage to

equipment.

■

The activities described in these operating instructions may only

be carried out by skilled personnel who have the qualications

described below.

■

Keep unqualied personnel away from hazardous areas.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and

knowledge of country-specic regulations, current standards and directives, are capable

of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive

media.

1 2 3 4 5 6 7 8 9 10 11 ... 79 80

Pas de commentaire

WIKA CTH6500 Instructions d'exploitation Page 6