WIKA CTH6500 Instructions d'exploitation télécharger pdf (Page 25)

25WIKA operating instructions, models CTH6300 and CTH6500

2079988.02 04/2013 GB/D

6. Commissioning, operation

Conrm selection by pressing ENTER/MENU.

Now use the arrow keys ▲▼ to select the required calibration function.

Standard linearisation according to DIN IEC 60751 [oFF

Use the arrow keys ▲▼ to select CoFF. Press ENTER/MENU to conrm the required

setting.

Press ESC to return to the measuring mode.

Calibration by code oP1

Use the arrow keys ▲▼ to select oP1. Press ENTER/MENU to conrm the required

setting. A small 1 appears in the lower part of the display. Four characters follow it (hex

code / 0 ... F). The 4 characters can be changed by means of the arrow key up ▲. To go

to the next number press the arrow key down ▼.

If all 4 characters are entered as required, conrm by pressing ENTER/MENU. A small 2

appears and the following 4 characters can be changed as well.

Press ESC to return to the measuring mode.

When calling the oP1 by means of ENTER/MENU the oP1 function

(calibration by code) is activated even if the menu has been closed by

pressing ESC.

Unit Prob Lin2 CAL Chnl ArEA Lo6

CAL

oFF oP1 oP2

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Pas de commentaire

WIKA CTH6500 Instructions d'exploitation Page 25