WIKA CTH6500 Instructions d'exploitation télécharger pdf (Page 27)

27WIKA operating instructions, models CTH6300 and CTH6500

2079988.02 04/2013 GB/D

6. Commissioning, operation

Press ENTER/MENU to conrm the required setting. Si_ appears on the display. Use

the arrow keys ▲▼ to select the sign:

Si_ = the number to be entered is in the negative range (below 0.00 °C)

┘

= the number to be entered is in the positive range

Press ENTER/MENU to conrm the required setting. Fd 0 appears on the display.

Select the range using the arrow keys ▲▼:

Fd 0 = lower than 1,000 °C

Fd 1 = higher than 1,000 °C

Press ENTER/MENU to conrm the required setting. 00.00 appears on the display (or

similar). Enter the temperature of your reference now. Change the digits using the arrow

key ▲. Use the arrow key ▼ to switch to the next digit. After completing the input of the

temperature conrm by pressing ENTER/MENU.

Press [ESC] to return to the measuring mode.

The physical calibration oP2 cannot be cancelled by means of the ESC

key. If required, the calibration can be cancelled by switching o the

measuring instrument.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Pas de commentaire

WIKA CTH6500 Instructions d'exploitation Page 27